We make custom see thru skylight shades and non see thru covers for your barrel vaulted flat end skylights. You will need to tell us if you want the ends covered or not. We need the 4 measurements in inches to the nearest .25 inch entered to calculate your price.
Measure A the length of the frame from corner to corner of the metal skylight frame.
Measure B the width of the skylight metal frame from the outside corner to the outside corner.
Measure C the distance over the barrel along the frame from the bottom outside edge of the corner of the skylight metal frame to the same place on the opposite side.
Measure D the distance from the outside bottom edge of the skylight metal frame at the center of the end to the top of the barrel frame.
Enter your measurements in inches in decimal format (do not enter fractions such as 1/2, instead enter .5).
Take your precise measurements. All measurements should be in inches to the nearest .25 inch. If in-between .25 inches round up to the next .25 inch. Enter your measurements in inches and if not a whole number use decimal format for any non whole number (ex. do not enter 1/4, but instead enter .25).
Select the material block you prefer. The 80% blocks up to 80% of the heat and glare from the rays of the sun and up to 75% UV. The 90% blocks up to 90% of the heat from the rays of the sun, up to 90% UV and glare. You can see thru both materials.
Select your preferred color. Color should be based upon the color that will blend in with your roof if you can see the skylights from the ground. If you cannot see your skylights from the ground select the dark brown color.
Price shown is in price per square foot. Extended price will appear in the shopping cart. $80 minimum on each custom 80% shade and $90 minimum on each custom 90% shade.
If you want to order the non see thru material please call us at 888-215-2569 for more information and pricing.